The Metalplan Aqua+ water/oil separator is compatible with compressed air condensate generated by any type of lubricated compressor.
Its innovative design eliminates the need for gravity pre-separation and level adjustment, which are necessary in conventional separators to prevent overflow.

The Aqua+ water/oil separator strictly follows the guidelines of CETESB's ISO 14001 standard (Art. 18 and 19A) and meets the requirements of CONAMA 430 and ABNT NBR 14.605. and 19A) and meets the requirements of CONAMA 430 and ABNT NBR 14.605.

Due to its guaranteed tightness, there is no possibility of soil contamination by the separated oil, allowing your company's compressed air system to be balanced with the environment at a very low cost.

The contamination control carried out by the Aqua+ water/oil separator is essential when disposing of condensate with any hydrocarbon content, either in the compressor room or in the compressed air distribution network. This waste can cause serious environmental problems if handled improperly.

In addition, fines and sanctions are imposed on companies that fail to comply with environmental protection legislation.

Aqua+ has a flexible condensate inlet, which allows for up to four connections. The pre-filter, designed to withstand large quantities of oil, is responsible for depressurizing the condensate by means of resistant permeable layers, retaining all the solids before the post-filter.

The post-filter, designed for maximum condensate purity, achieves an excellent level of quality before disposal (<5ppm). The super-resistant discharge pipe conducts the condensate until it is completely depressurized.